Hello, good afternoon. I've got my intake tube, going into my sump from the display, attached to this pump and my outlet pump going into the display from the sump attached to the exact same pump. I have been messing with them for about two days now and i cant seem to get them to equalize, either the water level in the return section of my sump is going up, and after messing with it it will be going down but never stays the same. Any help on how to manage this issue? I am using vinyl tubing and both tubes are kink free and the sump is 30 gallons, and an original three section sump. I originally thought that gravity was assisting the intake tube and adjusted accordingly but that seems not to be the case. Again, any help would be much appreciated.
Thank you,
Chad
Thank you,
Chad