Results 1 to 14 of 14

Thread: hello i really want a bimac octo and I need one from a breeder

  1. #1

    hello i really want a bimac octo and I need one from a breeder

    hello! Im new here and I heard really good things about the bimac octo and I wanted to know if there are any breeders selling them because I want a young one or an egg depending on which is easiest to care for...

  2. #2
    well im going to bed so post a message here or PM me whatever floats your boat :P

  3. #3
    GPO Supporter Opcn's Avatar
    Join Date
    Mar 2006
    Location
    Anchorage, Alaska, United States
    Posts
    114
    You want a young one, hatchlings need small food which is harder to deal with.

  4. #4
    Keep an eye on the "octopus availability" thread for when tank-bred bimacs are available.... that's generally the best source of information. There seems to be a pretty low survival rate for eggs or hatchling octos, you're very likely better off getting a young, but not tiny, bimac from someone like Zyan Silver.

    Have you read the ceph care articles and made sure your system is appropriately set up for an octo and fully cycled? It's best to have the system ready first, and then start looking into getting the octo itself...
    Miskatonic University Marine Biology and Esoteric Studies Laboratory

  5. #5
    no not yet i just wanted to make sure they were stock up and all that before i got the tank ready and besides my mom already has a reef tank so it should be no problem to set up the octopus tank :) and thank you for the info

  6. #6
    These are specialty animals that are only occasionally bred and can be difficult to find. This isn't like finding clownfish, which are typically bred in great quantities and widely distributed year-round. You should prepare yourself to wait months, or perhaps years.

  7. #7
    darn thats a bummer i do have access to pigmys but they are WAY to small for me and besides they can fit through almost any hole
    Last edited by crocgurl93; Jul 15, '07 at 10:41am. Reason: sorry i keep finding mispelled stuff

  8. #8
    Also, before you start seriously looking for your octopus, you need to have your tank set up and cycled (you won't just be able to keep it in your mom's reef tank, although her knowledge will help you). You need to have located food sources and make sure you can afford the cost associated with an octopus.

    Have you read the articles (click on Articles above) that pertain to octopus keeping?

    Nancy

  9. #9
    I learned that I wasn't allowed to put a bimac in reef tanks on google :) and also I learned that they are difficult to keep but I'll look into the articles too but I don't have a tank setup yet I wanted to make sure they were available first because I don't want to have a tank all set up and wait forever for a bimac

  10. #10
    Well thats funny your article is the one I looked at on google I read through it a tad and I'm going to look at the rest ;)

  11. #11
    Trust me, if you really want to enjoy your experience with cephalopods...be very, very patient. It may be years before you get one, it may be months...you have to just enjoy all the time !
    "They go in, but they don't come out."
    Mr. Spock

    http://www.ewaldbros.com

  12. #12
    oh i found someone with eggs and there waiting for them to hatch luckily so I can get the tank set up

  13. #13
    It will still have to cycle for 3 months before you'll be ready for an octo.
    "Neptune, leave our hydrothermal vent habitat alone!! Ban deep-sea mining!"
    Steve O'Shea

  14. #14
    oh ya I know that I'm just saying :D

Similar Threads

  1. WANTED: cuttlefish and/or bimac breeder
    By Bob the kracken in forum Marketplace
    Replies: 0
    Last Post: Apr 01, '07, 5:46pm
  2. Would a 40 breeder work for bimac?
    By ChickenCanoneer in forum Octopus Care
    Replies: 4
    Last Post: Dec 10, '06, 2:37pm
  3. Fish Net Breeder...
    By Maifun in forum Tank Talk
    Replies: 8
    Last Post: Nov 11, '06, 10:42pm
  4. idea for breeder
    By joefish84 in forum Octopus Care
    Replies: 20
    Last Post: Mar 23, '06, 12:29am

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •